TM 55-2840-254-23
2-7.1 INSTALL INTERSTAGE AIR-BLEED ACTUATOR (WITH WATER WASH KIT
2-7.1
PIN 2-200-071-54 INSTALLED) (Continued)
5. Position piston assembly (5) so hole (12) can be
seen through slot (6). Install pin (13), washer
(14), and cotter pin (15).
6. Install on compressor housing. Secure with
two bolts (16) and eight bolts (17). Toque two
top bolts (16) to ten inch-pounds. Torque
remaining eight bolts (17) in pairs 180
degrees apart in rotation to 20 inch-pounds
initial torque. Retorque same eight bolts (17)
in same seqience to 35 to 40 inch-pounds
LockWire ten bolts (16 and 17). Use Iockwire
(E29).
GO TO NEXT PAGE
Change 5 2-28.3
