TM 1-1510-253-CL
NOTE
Engine shutdown with an open current
limiter is not recommended unless an en-
gine malfunction has been detected.
10. Engine Stop & Feather (Affected
Engine):
a. Pull only until fuel flow shuts off.
Do not allow engine to windmill during
rpm decay longer than one minute. Fail-
ure to comply could cause damage to
equipment.
b. Let engine windmill until 200C EGT,
30% RPM or 1 minute, whichever
occurs first, then pull aft and confirm
Do not permit inoperative engine to wind-
mill in 18% to 28% RPM range. Failure
to comply could cause damage to equip-
ment.
11. Engine Cleanup Procedures, (Selected
Engine):
a. FUEL SHUT OFF Switch -- CLOSED
b. HYDRAULIC SHUT OFF Switch --
CLOSED
c. FUEL BOOST PUMP Switch -- OFF
OFF
e. Engine Stop & Feather -- Forward
f. IGNITION/ICE PROTECTION --
SET As Required
E-8