TM 1-1510-253-CL
16. Fuel Flow -- Check (Begins at 10%
RPM)
17. EGT -- Check (Increase at 10% to 20%)
Abort by pulling engine stop and feather
control if, EGT does not increase by 25%.
Failure to comply could cause damage to
equipment.
18. Fuel & Oil Pressure -- CHECK in Green
Arc
19. GENERATOR Switch -- RESET / ON
20. BLEED AIR Switch -- ON
21. POWER -- Matched
22. TCAS -- Select TA / RA
MANUAL ENGINE START
NOTE
Delay moving Speed Switch Select
Switch to MANUAL until RPM reaches
15% when EGT is above 200C.
1. SPEED Switch SELECT Switch -- OFF
2. START Button -- PRESS
3. SPEED Switch SELECT Switch (10%
RPM) -- MANUAL
4. START Button -- Maintain EGT 685C -
695C
5. When engine has stabilized:
a. SPEED Switch SELECT Switch --
AUTO
b. Continue with normal engine start
procedure.
6. SRL / TEMP LIMITER -- CHECK
E-10