TM 55-2840-231-23
1-29. Engine - Removal From Shipping Container - Continued
LOCATION/lTEM
REMARKS
8. Engine Shipping
Container
9. Engine Shipping
Container
10. Engine Assembly
11. Engine
Brackets removed during this action are to
remain with the shipping container.
12. Engine
Mounting brackets installed in this action are
supplied with Engine Turnover Stand, Tool No.
6795579.
Do not use the shipping container
mounting brackets in lieu of the
turnover stand mounting brackets.
Damage to engine could occur.
13. Engine Shipping
Container
14. Desiccant
15. Container Base
Assembly (19)
16. Cover Assembly (2)
17. Cover Assembly (2)
ACTION
I
Remove cotter pin (14)
and pull out on pin as-
sembly (13) until it dis-
engages from the engine
bottom mount.
Remove bolt (10) and
washer (11).
Lift out of shipping con-
tainer.
Remove three engine
mounting brackets (12).
Install three mounting
brackets on engine.
Install engine in turnover
stand.
Place all loose shipping
container hardware in
cloth bag supplied with
container. Place bag in
bottom of container.
Remove from desiccant
basket (20).
Install gasket (3) on
container base assembly
(19).
Lower into place.
Engage forward end of
cover with guide pin in
closure flange of base
assembly (19) then
lower aft end.
Insure gasket (3) is
properly seated.
1-27
