TM 55-2840-231-23
1-30. Engine - Installation Into Reusable Metal Shipping and Storage Container - Continued
I
LOCATION/ITEM
REMARKS
ACTION
SHIPPING OR STORAGE Engine Assembly Lift, Tool No. 6796963
a. Suspend engine from
CONTAINER/-Continued
a hoist in upright posi-
tion (exhaust ducts up)
using engine assembly
lift.
Lockwire (item 7, Appendix D)
b. Remove three turn-
over stand mounting
brackets and assemble
three engine mounting
brackets (12) on the
engine using nine bolts
(10) and washers (11).
Tighten bolts to 85-
110 in. lb (1.0-1.3
kg/m) and Iockwire.
Do not use the engine turnover stand
mounting brackets in lieu of engine
mounting brackets (12). Damage to
engine could occur.
c. Lower engine into con-
tainer until the bottom
mounting bracket (12)
engages with bottom
mounting adapter.
d. Aline pin holes and
engage pin assembly
(13). Secure with
one cotter pin (14).
e. Insert two side mount-
ing adapters (5) through
the locating holes in
yoke assembly (15) and
engage with two side
mounting brackets (12).
Secure with two pins
(9) and cotter pins (8).
f. Secure two side mount-
ing adapters (5) to yoke
assembly (15) with four
bolts (4), washers (6)
and nuts (7). Tighten
nuts (7) firmly then
loosen one complete
turn.
1-31
