TM 55-2840-231-23
1-30. Engine - Installation Into Reusable Metal Shipping and Storage Container - Continued
LOCATION/lTEM
REMARKS
ACTION
SHIPPING OR STORAGE
CONTAINER/ - Continued
c. Remove thirty-two
nuts (1) and bolts (37)
from the closure flange
and remove cover as-
SEMBLY (2).
d. Remove two cotter
pins (8) and pins (9)
and remove engine side
mounting brackets (12).
e. Remove cotter pin (14)
and pull out pin assembly
(13) until it disengages
from the engine lower
mounting bracket (12).
Remove the mounting
bracket.
f. Remove four nuts (7),
washers (6), and bolts
(4) and remove engine
side mounting adapter
(5).
g. Inspect container to
determine that it is
complete and service-
able. Particular atten-
tion should be given
to mounting brackets,
bolts, nuts, pins and
cotter pins in engine
suspension system.
Replace parts which
show signs of wear
and/or darnage.
2. Installation of
Engine in Container
To prevent injury to personnel, the
fuel system of all engines that are
to be placed in containers (less
accident-involved engines) will be
thoroughly drained, purged, and
preserved. All disconnected lines
will be capped or plugged. Tape will
not be used in place of caps or plugs.
1-30
