TM 55-4920-328-13
a. For engine model CP-700 only, assemble the
packing (1) on the adapter assembly (2), and install the
assembled parts as shown in view A, using two washers
(4), two washers (5), and two screws (3). Install the tee
(6) in the adapter assembly and install the reducer (7) in
the side leg of the tee. Connect one end of the hose
assembly (8) to the reducer and connect the other end
to the engine oil breather fitting. Connect hose
assembly (9) to the top leg of the tee.
b. For engine model CP-702 only, connect the
tube assembly (10) as shown in view B, then install the
reducer (11) in the tube assembly. Install the tee (6) in
the reducer. Install the reducer (12) in the side leg of
the tee and install the cap assembly (13). Connect hose
assembly (9) to the top leg of the tee.
c. Position the gasket (14) on the starter
generator mounting studs, install the starter generator
(15), and secure the installation using four washers (16)
and four nuts (17).
KEY TO FIGURE 2-43.
1.
Packing - MS29561-017
2.
Adapter Assembly - LTCT210301-01 (1)
3.
Screw - NAS1352-3H8 (1)
4.
Washer - MS35338-43 (1)
5.
Washer - AN960C10 (1)
6.
Tee- 16A6BX-SS
7.
Reducer- NAS1564J16-6 (1)
8.
Hose Assembly - MS28741-6-0300 (1)
9.
Hose Assembly - MS28741-16-0140
10.
Tube Assembly - LTCT21695-01 (2)
11.
Reducer- AN919-23J (1)
12.
Reducer - NAS1564J16-6 (2)
13.
Cap Assembly - AN929-6J (2)
14.
Gasket - MS9135
15.
Starter Generator - LTCT21992-01
16.
Washer- MS35338-45
17.
Nut - AN121503
18.
Manifold Assembly - LTCT21452-01
19.
Bracket - LTCT21453-01
20.
Bolt - MS9518-06
21.
Washer- MS35338-43
22.
Nut - AN121501
23.
Clamp - MS21105-6
24.
Screw - MS35207-261
25.
Washer- MS35338-44
26.
Nut- AN121501
27.
Manifold Assembly - LTCT21452-01
28.
Bracket - LTCT21563-01
29.
Tee- LTCT21454-01
30.
Nipple - LTCT21777-21
31.
Coupler - LTCT21776-21
32.
Bracket - LTCT21564-01
33.
Bolt- MS9518-06
34.
Washer- MS35338-43
35.
Nut - AN121501
36.
Inlet Housing Thermocouple - LTCT3991
37.
Packing - MS29512-04
38.
Nipple - MS9193-04
39.
Hose Assembly - MS28741-4-0180
40.
Nipple - AN816-4J
41.
Drain Bottle- BLT509CC
42.
Hose Assembly - MS28741-6-1440
43.
Packing - MS29512-04 (1)
44.
Nipple - MS9193-04 (1)
45.
Hose Assembly - MS28741-4-1440 (1)
46.
Hose Assembly - MS28741--Q-1440
47.
Tail Pipe- LTCT21447-01 (1)
48.
Bolt - MS20034-2
49.
Washer - AN960C416
50.
Nut - MS20500-428
51.
Tail Pipe- LTCT21447-02 (2)
52.
Packing - NAS1598-8
53.
Chip Detector- CD42BA
54.
Gasket - MS9134-01
(2)
55.
NII Tachometer Generator - MS25038-4 (2)
56.
Washer- MS35338-44
57.
Nut- AN121502
58.
Cover - AN5025-1
59.
Spacer - NAS43DD5-30
60.
Nut - MS21044N5
61.
Plug - MS20913-6D
62.
Packing - NAS617-12
63.
Nipple- MS9193-12
64.
Reducer- NAS1564J12-4
65.
Nut - AN818-12J
66.
Elbow - 12C6X-SS
67.
Hose Assembly - MS28741-4-1440
68.
Nipple- LTCT21820-02
69.
Temperature Bulb - MS28034-3
70.
Cap Assembly - AN929-4J (2)
71.
Packing - MS29561-021
72.
Adapter- LTCT21389-01
73.
Washer - AN960C10L
74.
Screw- NAS1352-3410
75.
Elbow - 16V6X-SS
76.
Hose Assembly - MS28741-16-1440
2-156
