TM 55-4920-328-13
2-67.
CONNECTION OF ENGINE HOSES AND
CABLES TO DATA ACQUISITION ASSEMBLY.
a.
Connect
thermocouple
harness
17A8575PO1
electrical connector P16 to connector J16 (41, figure 2-
59) on data acquisition assembly (1).
b.
Connect
water
brake
thermocouple
harness
17A8628PO1 electrical connector P8 to J8 connection
on data acquisition assembly (1).
c.
Attach compressor discharge hose 17A8585G01
(7) to connector M4 (43) on data acquisition assembly
(1).
d.
Attach fuel supply hose 17A8586G01 (21, figure
2-59) to connectors M11 and S1 (44 and 45) on data
acquisition assembly.
e.
Attach water brake pressure-IN hose 17A8585G03
(11) and water brake pressure-OUT hose 17A8585G04
(12) as follows:
(1)
Connect Pressure-IN hose (11) to connector
M1 (46) on data acquisition assembly (1).
(2)
Connect
Pressure-OUT
hose
(12)
to
connector M2 (47) on data acquisition assembly (1).
f.
Connect strain gage cable (17) to J12 connector
(53) on data acquisition assembly (1).
g.
Connect
PAS
and
variable
stator
harness
17A8577P01 (18) connectors as follows:
Change 5 2-243
