NAVAIR 01-1A-505-3
TO 1-1A-14-3
TM 1-1500-323-24-3
014 02
1 September 2011
Page 34
Cable Jacket
1. For environmental contact slide
environmental sleeve over cable prior to
stripping.
Environmental
Boot
Cable Jacket
0.591"
15 mm
2. Strip outer cable jacket to dimensions
shown, IAW NAVAIR 01-1A-505-1 WP 009
00.
Cable Jacket
0.394"
(10 mm)
3. Comb out exposed shield braid and cut the
rod fillers.
4. Trim both center conductors to dimension
shown.
Center
Conductor
Combed
Shield
Shield Crimp
Sleeve
Cable
5. Slide the shield crimp sleeve on the cable
till butted against cable jacket.
Shield crimp sleeve
should slide over
cable jacket and butt
at the end of the
jacket.
0.098"
2.5 mm
6. Fold combed shield braid over shield crimp
sleeve and trim to dimension.
7. Trim center conductors to correct length
(0.276 inches).
0.098"
8. Strip center conductors to dimensions
Shield Crimp
2.5 mm
shown, IAW NAVAIR 01-1A-505-1 WP 009
Sleeve butts
0.276"
against cable
00
7 mm
jacket
Figure 36. 617190010 and 167090010 Triaxial Contact Buildup (Sheet 1 of 3)
